Saturday, December 29, 2012

WOW! Where has everything gone? 300 AAC Blackout Case Prep.

     Wow! Where has everything gone? Seems like there is a gun ban coming around the corner, being sarcastic here so bear with me. Well my mission today was to go out and see what I could find locally for reloading 300 AAC Blackout at some of the hidden places that most metro-sexuals don't know about. One place is a restaurant supply store that has a reloading shop in the back. These people were a frequent site at one of the two gun shows we have locally. Well the family and I arrive and see the sign.
 
We arrived at 1230, and their sign said they closed at 1300, well the doors were locked and after looking in the tinted windows, seems they aren't in business anymore. Another casualty of the Obama Administration. 
 
So we load up and proceed to the second location and happen across a one pound jug of IMR 4227 which I can use. After a quick survey, I pay for the powder and proceed to our third establishment.
 
The third stop is notorious for high-quality Chinese crap, here is where I bought a cut off saw for case sizing.
 
The last a final place has reloading stuff along with metro-sexual camping, fishing, and hunting stuff. As I am ND are in the reloading section I notice a fellow and his wife walking around frantically looking for something. Well by this time, JUGM and NW come over and we observe the fellow ask the sales associate, do you have any .223 ammo. I look at JUGM and just smile. The poor young sales associate tells the fellow, "We are out and have no exact date of when we will get anymore in". The man spits out his shuttering mouth, "Why do I have a AR15 if I can't get ammo for it". Now in my "Jump at an opportunity when you get it" moment, I say to the man and his wife, "Well you should have thought about ammo 4 years ago, sucks to be you." and we turn and walk away giggling. I heard utter silence behind me. I'm sorry if I was a complete ass-hole to this poor man and his wife, but don't tell me that anyone who has seen the writing on the wall for at least the past 10 years, would not have taking the same jab at them as I did. Well this final place had nothing in the 110-135 grain range for .308 so we left.
 
Since the 300 AAC Blackout uses the 5.56x45 or 223 case and trying to find that specific brass with all that is going on, I decided I will make my own. Doing a bit of research on the NET, it really isn't that hard to make.
 
 
 
    The next thing I though about is how will I cut the casings using the cut-off saw, so I made a jig for the saw so I get good and even cuts each time.
 
 
 
    After making the cut, just below the neck on the 5.56 case, this is the outcome.
 
 
 
   After the cut, there is some minor case trimming to do to remove the burs caused by the saw.
 
     Once the burs are removed from the case, I apply some RCBS case lube to it and run it in the sizing die. I only did one case at a time to get my exact sizing down before I go into a production run. Note: I learned reloading from a very wise man with VAST reloading knowledge, lets just say that I learned about 4 decades worth of reloading in one day. This man knows his stuff. Anyone know who it is?
 
 
 
   After making a couple cases, here they are with the production case that I had shot. Which ones are they? They should be easy to spot.
 
 
 
 
    As most of you have seen, there is a shortage of reloading supplies, but did manage to order some bullets and a LEE Case trimmer, which is on backorder until later next week. Once I get these things in, I will continue with the 300 AAC Blackout postings.
 
 
Senior

 

 
 

 

 






10 comments:

  1. Good luck, I have been buying and putting back for years... :-) And good idea on the reloading. I'd be hitting the ranges for cases too...

    ReplyDelete
    Replies
    1. Things are going to get scarce pretty soon, stock up now while you can

      Delete
  2. Great..... now we'll see a tax on cut-off saws!!!! :)

    Well done sir, well done!

    ReplyDelete
    Replies
    1. Yes my friend, you may be right, a tax on cut-off saws is in the near future.

      Delete
  3. Well Done! We finally found the elusive 5.7 dies we've been looking for, I think someone had them put back and decided now was the right time to sell. They had five when we found them online, by the time we got it into our cart they had 2 and I don't know how fast those sold after we bought ours. It shipped today. Yay!

    ReplyDelete
    Replies
    1. I saw that same situation the night when all 30 rounder mags were flying off the online shelfs. Glad you have your new dies coming.

      Delete
  4. Smart, the cut off saw. To answer your question....let's see, maybe my father?

    ReplyDelete
    Replies
    1. Your father is a good man, glad I had the chance to sit and talk with him and learn.

      Delete
  5. Lee makes a bullet mold for the 300 Blackout which would be great for sub-sonic rounds and I guess you could use gas checks for hotter loads.

    ReplyDelete
    Replies
    1. guess I better start taking lead tire weights off cars then, wanna help?

      Delete